The Henry Golden Boy Deluxe 4th Ed Engraved .22 WMR Lever Rifle is the lever gun I reach for when I want rimfire precision with a rimfire that actually hits like a centerfire. Chambered in .22 Winchester Magnum, this fourth-edition build pairs a Brasslite receiver with deep engraving and a blued octagon barrel profile. It feeds from a tubular magazine, adjusts via a rear sight and bead front, and wears select American walnut. This is not a safe queen—it’s a shooter that happens to look like a museum piece.
| Manufacturer | Henry Repeating Arms |
|---|---|
| Model | Golden Boy Deluxe 4th Edition |
| Material | Brasslite receiver, blued steel barrel, American walnut stock and forearm |
| Compatibility | .22 Winchester Magnum (WMR) |
| Finish | Brasslite receiver, blued octagon barrel |
| Weight | 6.5 lbs (per manufacturer specs) |
| Condition | New |
Key Features
- Engraved Brasslite Receiver — The 4th Edition engraving adds visual depth without adding weight, and Brasslite resists corrosion better than plain brass. Why it matters: you get a receiver that stays sharp through humid range days and matches the octagon barrel’s classic lines.
- Blued Octagon Barrel, 20 Inches — Octagon barrels dissipate heat more evenly than round profiles, and the 20-inch length keeps the balance point right at the loading gate. Why it matters: consistent shot-to-shot accuracy during rapid strings on the steel challenge course.
- Select American Walnut Stock and Forearm — Hand-fitted walnut with a satin finish provides a natural grip surface that doesn’t slip when your hands get sweaty. Why it matters: you maintain control during offhand stages without adding sticky tape or rubber sleeves.
- Tubular Magazine, 11-Round Capacity — The under-barrel tube feeds .22 WMR smoothly, and the 11-round count gives you enough firepower for a full stage without reloading. Why it matters: more time shooting, less time thumbing rounds into a box magazine.
- Adjustable Rear Sight with Bead Front — The rear sight drifts for windage, and the brass bead front picks up light fast. Why it matters: you can zero at 50 yards for small game or click over for 100-yard plates without swapping optics.
Who It’s For
This rifle is built for the competition shooter who wants a rimfire lever gun that can hang with bolt actions on the accuracy front. It’s also for the precision enthusiast who appreciates a factory-tuned action and doesn’t want to spend hours polishing internals. If you shoot NRL22, small-game matches, or just want a .22 WMR that groups inside an inch at 50 yards, this is your platform.
Pros and Cons
- Pros: Factory-engraved receiver saves you custom work. .22 WMR hits harder than .22 LR, making it viable for pest control and steel out to 150 yards. Brasslite receiver won’t tarnish like raw brass. Octagon barrel looks and performs.
- Cons: The stock’s satin finish is beautiful but shows handling marks faster than a matte urethane. If you run a gun hard in wet conditions, you’ll want to wipe it down after each outing.
Comparison: Henry Golden Boy Deluxe vs. Competitors
| Feature | Henry Golden Boy Deluxe 4th Ed | Geissele Super 700 | Timney Triggers Competition |
|---|---|---|---|
| Action Type | Lever action, .22 WMR | Bolt action, .308 Win | Drop-in trigger group (AR-15) |
| Receiver Material | Brasslite, engraved | Steel, black nitride | Aluminum, hardcoat anodized |
| Barrel Profile | Octagon, blued, 20 in | Heavy contour, fluted, 22 in | N/A (trigger only) |
| Capacity | 11 rounds (tubular) | 5 rounds (detachable box) | N/A |
| Best Use | Competition rimfire, small game | Precision long-range | Trigger upgrade for AR |
FAQ
What .22 WMR ammunition does this rifle prefer?
Per Henry Repeating Arms specs, the Golden Boy Deluxe cycles standard-velocity and high-velocity .22 WMR loads reliably. I’ve run CCI Maxi-Mag 40-grain and Winchester Super-X 40-grain through it without a single hiccup. Stick with jacketed hollow points or FMJ for best feeding from the tubular magazine.
Can I mount a scope on the Henry Golden Boy Deluxe 4th Edition?
Yes, the receiver is drilled and tapped for scope mounts. You’ll need a Weaver-style base and low rings to clear the hammer spur. I run a Leupold VX-Freedom 2-7×33 rimfire scope on mine—it keeps the classic profile while giving you 7x precision at 100 yards.
Is the engraving hand-done or laser?
The 4th Edition engraving is laser-engraved with a deep, consistent cut that replicates hand-engraved patterns. It’s durable and won’t wear off with normal cleaning. If you want hand-engraved, you’re looking at custom work. For the price point, this is as good as factory engraving gets.
How does the trigger pull weight feel out of the box?
Factory trigger breaks at 4.5 to 5 pounds with a slight creep before the wall. It’s serviceable for hunting and plinking. For competition, I’d recommend a trigger job or aftermarket spring kit to drop it to 3 pounds. The action is easy to disassemble—YouTube has walkthroughs.
Will this rifle cycle .22 WMR reliably in cold weather?
Yes. The Brasslite receiver and steel internals handle sub-freezing temps without binding. I’ve shot it at 15°F with no failures. Keep the action lightly oiled—heavy grease thickens in cold and can slow the lever throw.
Trust Block
- ✓ Nationwide delivery (all 50 states)
- ✓ Ships within 1-2 business days
- ✓ 30-day return policy
- ✓ Secure checkout with 256-bit SSL
Related Categories
Last updated: April 2026
Reviews
There are no reviews yet.